糖心传媒

REQUEST PRICING

Harness Safety and Working at Height

16 April 2014
Falls are among the most common causes of serious work-related injuries and deaths, with research pointing to a worrying increase in workplace fatalities in 2014 and increased evidence that working from a height presents the greatest chance of 鈥渄eath or serious injury鈥� within the construction industry. In fact according to the Occupational Safety and Health Administration (OSHA), a number of contracting firms and general construction companies have been cited for purposefully putting contractor safety on the line due to insufficient safety harness protocols or for repeatedly lacking appropriate fall safety procedures. Therefore, it鈥檚 extremely important that you instigate a process whereby harness safety is taken seriously and a simple harness oversight doesn鈥檛 end in catastrophe.

The Stats

According to the Bureau of Labor Statistics (BLS), falls, slips, and trips has increased by 10% from 2014. This was largely attributed to an increase in falls to a lower level, which went up by 9%. Furthermore according to research by OSHA, falls from heights are one of the leading causes of fatalities within construction. In the UK, falls from heights was the most 鈥渃ommon cause鈥� of fatalities accounting for three in ten (29%) of fatal injuries to workers, according to the Health and Saftey Executive (HSE). Falls also had a detrimental effect upon worker productivity, with 1.5 million working days lost due to falls, slips, and trips according to the HSE. These numbers emphasize the importance of implementing effective safety harness protocols to ensure contractor safety is at the top of the agenda at all times.

How to Ensure Safety Harness

safety harness OSHA has been at the forefront of devising safety mechanisms to ensure adequate safety harness training and equipment is provided on every construction project, therefore protecting the safety of your contract workers. In OSHA鈥檚 latest fall prevention campaign their advice centers around protecting contractor safety by offering tips on how you can plan, provide, and train your contract workers on all aspects of fall protection equipment. Safety harness training is obviously an important part of this guidance, as well as the following tips. Do
  • Always stay connected when using a safety harness.
  • Make sure your harness fits.
  • Inspect all fall protection equipment before use.
  • Guard or cover all holes, this includes skylights or other openings on buildings.
顿辞苍鈥檛
  • Disconnect from the lifeline
  • Work near unprotected openings in roofs or exposed skylights
  • Use defective equipment
You should also be aware that there are different categories to consider when you are devising your harness safety protocols. According to OSHA, all fall protection products fit into four distinct categories: Fall arrest According to OSHA, this system is necessary if contractor safety is at risk due to a fall from an elevated position. Therefore, OSHA recommends that you use the every time a contract worker is working from a height of 鈥渟ix feet or more.鈥� The system, OSHA notes, will only come into effect if a fall should happen. The agency recommends that you provide a 鈥渇ull-body harness with a shock-absorbing lanyard or a retractable lifeline鈥�. The full-body harness will distribute the 鈥渇orces throughout the body鈥� while the shock-absorbing lanyard will 鈥渄ecrease the total fall arresting forces,鈥� according to OSHA. Suspension This type of equipment lowers and supports your contract worker while ensuring contractor safety, according to the agency. This type of system would be widely used for outside construction, or for the installation of windows. However, according to the agency the system is 鈥渘ot designed to arrest a free fall鈥� that鈥檚 why OSHA recommends that you use a fall arrest system in 鈥渃onjunction with the suspension system.鈥� Retrieval Pre-planning for retrieval in the event of an accident should also be taken into 鈥渃onsideration when developing a full management program,鈥�. Make Sure Equipment is Inspected OSHA also highly recommends that you keep all harness equipment in good working order. This is why the agency advises you to ensure all of the harness and fall protection equipment is properly stored and maintained and is regularly cleaned of 鈥渄irt, corrosives, or contaminants.鈥� The agency recommends that the storage area should be 鈥渃lean, dry and free of exposure to fumes鈥� or other harmful chemicals.

How 糖心传媒 Can Help

Here at 糖心传媒 our contractor orientation software allows you to conduct all of your contractor safety training in one place. With 糖心传媒, you can create a custom process whereby all of your contract workers register themselves online, upload documents and photos, and take their orientation training. For example, for the purposes of harness safety you can ensure it becomes a pivotal part of your orientation process, by including it into your training program. You can also gather qualification cards online to ensure contractors are appropriately trained before they step foot on site. 糖心传媒 gives you a peace of mind that all of your contract workers are fully aware of harness safety, therefore decreasing the risk of falls from height.  
Sonya Sikra

Sonya is the Brand Strategy Manager at 糖心传媒. She specializes in communicating how implementing tech in construction can drive productivity and profit.

You may also like...

request a demo

Want to save thousands of initiation hours? We would love to show you a live, personalised demo!

Request a demo

Show me more!

Take a look at how GOCONTRACTOR can save you thousands of hours

Schedule My Demo